Skip to content
VARILIGHT

Data sheet: HT3

V-Dim

Data sheet

HT3 1-Gang 2-Way V-Dim Push On/Off Rotary Dimmer 1 x 60-400W

Single V-Dim Rotary 2-Way Dimmer 1 x 60-400W

This product can also be made using our Matrix System.

Product features

  • V-Dim heavy duty dimming for incandescent lighting, including mains and low voltage halogen
  • Dims 60-400W of lighting; add up your lamp wattages to choose the right dimmer
  • Push on/off, rotate to dim; use in a 1-way circuit or in a 2-way circuit alongside a standard switch
  • Remembers your last brightness setting when switched back on
  • For dimmable LEDs choose the V-Pro range instead
  • Bevel-edge faceplate, 8mm deep with chrome screws, fits a 25mm back box

Product

Product code
HT3
Category
Halogen Dimmers
Range
Classic
Finish
Brushed Steel
Insert / knob colour
Brushed Steel Knob
Barcode
5021575031591

Size and fitting

Dimensions
91x91x46mm
Faceplate depth
8mm
Fixing centres
60.3mm
Depth from mounting face
17.5mm
Recommended back box depth
25mm
Net weight
146g
Gross weight
148g

Electrical

Operating voltage
230V 50Hz
Maximum load rating
Halogen: 400W
Maximum current rating
1.7A
Terminal (Live)
3.2mm, capacity 3 x 1.5mm²
Terminal (Earth)
3.3mm, capacity 3 x 1.5mm²

Safety and compliance

Intended applications
Indoor Use Only. Domestic lighting circuits. Do not use masking tape on any decorative products, or install on damp plaster.
Safety advice
Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. This product's earth tag is fixed with a single rivet, a second rivet on the other screw hole is not required. Do not overload. Product Must Be Earthed.
Applicable safety standard
BS 5518
Commodity code
85365007

Classic collection

The Classic range is a contemporary take on a raised profile faceplate. The bevel-edge design is a timeless style, which will pair beautifully with any interior.

Brushed Steel finish

With its clean, understated style, Brushed Steel brings effortless sophistication to any room, and is a finish chosen by designers for its versatility. Black or white inserts and rockers are available, or choose matching brushed steel rockers.

All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of issue: 17th November 2026. © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.

Similar products

Other versions

You may also need

  • Replacement module for your V-Dim dimmer

    MTP402 2-Way V-Dim Push On/Off Rotary Dimmer Module Kit 60-400W

Where to buy