Skip to content
VARILIGHT

Data sheet: XFVM1

Data sheet

XFVM1 1-Gang 6A 1-Way Push-to-Make Momentary Switch

Single Momentary Retractive Switch

Product features

  • Momentary push to make switch that springs back when released
  • For blinds, doorbells and anything that needs a momentary signal rather than a permanent on
  • 6A rated
  • Springs back when released
  • Ultra-slim stainless steel faceplate, just 1mm deep with brass screws, fits a 25mm back box

Product

Product code
XFVM1
Category
Retractive Switches
Range
Ultraflat
Finish
Polished Brass
Insert / knob colour
Brass Button
Barcode
5021575782158

Size and fitting

Dimensions
89x89x23mm
Faceplate depth
1mm
Fixing centres
60.3mm
Depth from mounting face
18.6mm
Recommended back box depth
25mm
Net weight
106g
Gross weight
108g

Electrical

Operating voltage
230V 50Hz
Maximum load rating
6A
Maximum current rating
6A
Terminal (Live)
3mm, capacity 3 x 1.5mm²
Terminal (Earth)
3.3mm, capacity 3 x 1.5mm²

Safety and compliance

Intended applications
Indoor Use Only. Domestic power supply. Do not use masking tape on any decorative products, or install on damp plaster.
Safety advice
Product Must Be Earthed.
Applicable safety standard
BS EN 61058-1
Commodity code
85365011

Ultraflat collection

The Ultraflat range features a slim profile faceplate and provides an understated modern look. Cut from high quality stainless steel, this minimalist range will enhance any interior design scheme.

Polished Brass finish

The elegant Polished Brass finish features matching polished brass rockers with an option of black or white inserts.

All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of issue: 17th November 2026. © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.

Similar products

Where to buy