Skip to content
VARILIGHT

Data sheet: JVM102

V-Pro Multiway

Data sheet

JVM102 2-Gang V-Pro Multiway Dimmer 2 x 120W LED

Double V-Pro Multiway Dimmer 2 x 120W LED

Product features

  • V-Pro intelligent dimming, the industry standard for LED
  • Dims 120W of lighting per circuit with no minimum load and no maximum number of lamps
  • Rotary dimming from 2 or 3 switch locations with one or two companion controllers
  • Simply replaces the existing switches, no additional wiring required
  • Smooth, silent dimming with V-Pro technology on board
  • Soft start brings the lights up gently, with intelligent overload protection
  • Push on/off, rotate to dim; settings are saved even after a power cut
  • Bevel-edge faceplate, 8mm deep with brass screws, fits a 25mm back box

Product

Product code
JVM102
Category
LED Dimmers
Range
Classic
Finish
Victorian Brass
Insert / knob colour
Brass Knob
Barcode
5021575038118

Size and fitting

Dimensions
91x91x46mm
Faceplate depth
8mm
Fixing centres
60.3mm
Depth from mounting face
17.5mm
Recommended back box depth
25mm
Net weight
186g
Gross weight
188g

Electrical

Operating voltage
230V 50Hz
Maximum load rating
LED: 120W
Maximum current rating
0.4A
Terminal (Live)
3.2mm, capacity 3 x 1.5mm²
Terminal (Earth)
3.3mm, capacity 3 x 1.5mm²

Safety and compliance

Intended applications
Indoor Use Only. Domestic lighting circuits including many dimmable LEDs. Do not use masking tape on any decorative products, or install on damp plaster.
Safety advice
Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors This product's earth tag is fixed with a single rivet, a second rivet on the other screw hole is not required. Do not overload. Product Must Be Earthed.
Applicable safety standard
BS EN 60669-2-1
Commodity code
85365005

Classic collection

The Classic range is a contemporary take on a raised profile faceplate. The bevel-edge design is a timeless style, which will pair beautifully with any interior.

Victorian Brass finish

For a polished look, the Victorian Brass finish makes a perfect choice with classic styling and clean lines. Choose from black, white or matching polished brass rockers.

All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of issue: 22nd November 2026. © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.

Similar products

Other versions

You may also need

  • LEDFix: helps LED lamps dim smoothly

    YAGF LEDFix (for use in conjunction with some LEDs)

  • Companion controller, to dim from 2 or 3 places

    JVS2 2-Gang V-Pro Multiway Companion Controller

Where to buy