Data Sheet
Product Code: JRES003
Product Description: 3-Gang Tactile Touch Control Dimming Companion Controller for use with Multi-Point Master on 2-Way Circuits (Twin Plate)
Range: Classic
Finish: Pewter
Product Category: LED Dimmers
Insert/Knob Colour: Chrome Buttons
Barcode: 5021575552249
Dimensions: 91x150x27mm
Faceplate Depth: 8mm
Net Weight: 210g
Gross Weight: 212g
Fixing Centres: 120.6mm
Depth from Mounting Face: 16.1mm
Recommended Back Box Depth: 25mm
Operating Voltage: 230v 50Hz
Maximum Load Rating: Refer to Master Dimmer
Maximum Current Rating: Refer to Master Dimmer
Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²
Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²
Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.
Note: Some LED lamps are not designed for electronic dimmer switches and may remain illuminated even when a dimmer switch is turned off. This can be corrected using one Varilight LEDFix load regulator per circuit (part number YAGF-P). Do not use masking tape on any decorative products, or install on damp plaster.
Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.
Applicable Safety Standard: BS EN 60669-2-1
Commodity Code: 85365005



Product Features
V-Pro Multi-Point intelligent dimming: control the lights from every location on the circuit
Touch to dim from the tactile touch pad: press anywhere for on/off, hold the top to brighten and the bottom to dim
One master with any number of supplementary controllers on the circuit
Retrofits with standard 3 core and earth wiring
Programmable driving modes and adjustable minimum brightness for wider LED compatibility
Bevel-edge faceplate, 8mm deep with chrome screws, fits a 25mm back box
Classic Collection
The Classic range is a contemporary take on a raised profile faceplate. The bevel-edge design is a timeless style, which will pair beautifully with any interior.
Pewter Finish
The Pewter finish makes a dramatic statement with its contrasting polished chrome switch rockers, toggle and dimmer knobs. Supplied with black inserts.
All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of Issue:
11th September 2026 © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.














