Data Sheet

Product Code: JPS1

Product Description: 1-Gang V-Pro Multiway Companion Controller

Range: Classic

Finish: Graphite 21

Product Category: Smart Dimmers

Insert/Knob Colour: Iridium Knob

Barcode: 5021575037173

Dimensions: 91x91x46mm

Faceplate Depth: 8mm

Net Weight: 146g

Gross Weight: 148g

Fixing Centres: 60.3mm

Depth from Mounting Face: 17.5mm

Recommended Back Box Depth: 25mm

Operating Voltage: 230v 50Hz

Maximum Load Rating: See master dimmer

Maximum Current Rating: -

Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²

Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs. Do not use masking tape on any decorative products, or install on damp plaster.

Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors This product's earth tag is fixed with a single rivet, a second rivet on the other screw hole is not required.. Do not overload. Product Must Be Earthed.

Applicable Safety Standard: BS EN 60669-2-1

Commodity Code: 85365005

Declaration of Conformity

Product Features

  The companion for V-Pro Multiway and V-Pro Smart dimmers in multi-way circuits

  Full dimming control from up to three places in the room

  Push on/off, rotate to dim, exactly like the master dimmer

  Simply replaces an existing switch, no additional wiring required

  Use one or two companion controllers with each master

  Bevel-edge faceplate, 8mm deep with black screws, fits a 25mm back box

Classic Collection
The Classic range is a contemporary take on a raised profile faceplate. The bevel-edge design is a timeless style, which will pair beautifully with any interior.

Graphite 21 Finish
Dark and moody, the Graphite finish brings an industrial feel and works beautifully with neutral colour schemes. Supplied with black inserts and black screws, with a choice of black or iridium rockers.