Data Sheet

Product Code: JFIES003

Product Description: 3-Gang Tactile Touch Control Dimming Companion Controller for use with Multi-Point Master on 2-Way Circuits (Twin Plate)

Range: Ultraflat

Finish: Iridium

Product Category: LED Dimmers

Insert/Knob Colour: Iridium Buttons

Barcode: 5021575522242

Dimensions: 89x149x26mm

Faceplate Depth: 1mm

Net Weight: 170g

Gross Weight: 172g

Fixing Centres: 120.6mm

Depth from Mounting Face: 23.2mm

Recommended Back Box Depth: 35mm

Operating Voltage: 230v 50Hz

Maximum Load Rating: Refer to Master Dimmer

Maximum Current Rating: Refer to Master Dimmer

Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²

Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.
Note: Some LED lamps are not designed for electronic dimmer switches and may remain illuminated even when a dimmer switch is turned off. This can be corrected using one Varilight LEDFix load regulator per circuit (part number YAGF-P). Do not use masking tape on any decorative products, or install on damp plaster.

Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.

Applicable Safety Standard: BS EN 60669-2-1

Commodity Code: 85365005

Declaration of Conformity

Product Features

  V-Pro Multi-Point intelligent dimming: control the lights from every location on the circuit

  Touch to dim from the tactile touch pad: press anywhere for on/off, hold the top to brighten and the bottom to dim

  One master with any number of supplementary controllers on the circuit

  Retrofits with standard 3 core and earth wiring

  Programmable driving modes and adjustable minimum brightness for wider LED compatibility

  Ultra-slim stainless steel faceplate, just 1mm deep with iridium screws, fits a 35mm back box

Ultraflat Collection
The Ultraflat range features a slim profile faceplate and provides an understated modern look. Cut from high quality stainless steel, this minimalist range will enhance any interior design scheme.

Iridium Finish
The Iridium Black finish lends an air of sophistication and modernity with its deep, lustrous tone adding a touch of drama to stylish interiors. Supplied with black inserts and matching iridium rockers.