Data Sheet

Product Code: JDYS2S.JB

Product Description: 2-Gang V-Pro Multiway Companion Controller

Range: Jubilee

Finish: Brushed Brass

Product Category: Smart Dimmers

Insert/Knob Colour: Brass Knob

Barcode: 5021575037777

Dimensions: 86x86x48mm

Faceplate Depth: 4mm

Net Weight: 196g

Gross Weight: 198g

Fixing Centres: 60.3mm

Depth from Mounting Face: 23.6mm

Recommended Back Box Depth: 35mm

Operating Voltage: 230v 50Hz

Maximum Load Rating: See master dimmer

Maximum Current Rating: -

Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²

Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs. Do not use masking tape on any decorative products, or install on damp plaster.

Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.

Applicable Safety Standard: BS EN 60669-2-1

Commodity Code: 85365005

Declaration of Conformity

Product Features

  The companion for V-Pro Multiway and V-Pro Smart dimmers in multi-way circuits

  Full dimming control from up to three places in the room

  Push on/off, rotate to dim, exactly like the master dimmer

  Simply replaces an existing switch, no additional wiring required

  Use one or two companion controllers with each master

  Beaded-edge screwless faceplate, just 4mm deep with no visible fixings, fits a 35mm back box

Jubilee Collection
The Jubilee range combines the clean lines of a screwless low profile faceplate with a delicately beaded edge, capturing the charm and grace of neo-classical design with a contemporary twist.

Brushed Brass Finish
Jubilee Brushed Brass pairs the beaded-edge faceplate with polished brass rockers, toggles and dimmer knobs, with a choice of black or white inserts.