Click below to print the data sheet for JDYP401S.JB
Further information:
Data Sheet
Product Code: JDYP401S.JB
Product Description: 1-Gang 2-Way V-Pro Push On/Off Rotary LED Dimmer 1 x 0-120W
Range: Jubilee
Finish: Brushed Brass
Product Category: LED Dimmers
Insert/Knob Colour: Brass Knob
Barcode: 5021575186062
Dimensions: 86x86x48mm
Faceplate Depth: 4mm
Net Weight: 156g
Gross Weight: 158g
Fixing Centres: 60.3mm
Depth from Mounting Face: 23.6mm
Recommended Back Box Depth: 35mm
Operating Voltage: 230v 50Hz
Maximum Load Rating: LED: 120W
Maximum Current Rating: 0A
Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²
Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²
Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs. Do not use masking tape on any decorative products, or install on damp plaster.
Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.
Applicable Safety Standard: BS EN 60669-2-1
Commodity Code: 85365005
Product Features
V-Pro intelligent dimming, the industry standard for LED
Dims 0-120W of lighting with no minimum load and no maximum number of lamps
Optimised for dimmable LEDs, no buzzing, no flickering
Silent trailing edge dimming that is gentle on the load
Soft start brings the lights up gently, with intelligent overload protection
Adjustable minimum brightness and a choice of driving modes to get the best from any LED
Push on/off, rotate to dim; settings are saved even after a power cut
Beaded-edge screwless faceplate, just 4mm deep with no visible fixings, fits a 35mm back box
Jubilee Collection
The Jubilee range combines the clean lines of a screwless low profile faceplate with a delicately beaded edge, capturing the charm and grace of neo-classical design with a contemporary twist.
Brushed Brass Finish
Jubilee Brushed Brass pairs the beaded-edge faceplate with polished brass rockers, toggles and dimmer knobs, with a choice of black or white inserts.
Rear View:
All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of Issue:
19th September 2026 © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.
