Data Sheet
Product Code: JDIES003S
Product Description: 3-Gang Tactile Touch Control Dimming Companion Controller for use with Multi-Point Master on 2-Way Circuits (Twin Plate)
Range: Screwless
Finish: Iridium
Product Category: LED Dimmers
Insert/Knob Colour: Iridium Buttons
Barcode: 5021575112252
Dimensions: 86x147x27mm
Faceplate Depth: 4mm
Net Weight: 200g
Gross Weight: 202g
Fixing Centres: 120.6mm
Depth from Mounting Face: 21.6mm
Recommended Back Box Depth: 35mm
Operating Voltage: 230v 50Hz
Maximum Load Rating: Refer to Master Dimmer
Maximum Current Rating: Refer to Master Dimmer
Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²
Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²
Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.
Note: Some LED lamps are not designed for electronic dimmer switches and may remain illuminated even when a dimmer switch is turned off. This can be corrected using one Varilight LEDFix load regulator per circuit (part number YAGF-P). Do not use masking tape on any decorative products, or install on damp plaster.
Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.
Applicable Safety Standard: BS EN 60669-2-1
Commodity Code: 85365005



Product Features
V-Pro Multi-Point intelligent dimming: control the lights from every location on the circuit
Touch to dim from the tactile touch pad: press anywhere for on/off, hold the top to brighten and the bottom to dim
One master with any number of supplementary controllers on the circuit
Retrofits with standard 3 core and earth wiring
Programmable driving modes and adjustable minimum brightness for wider LED compatibility
Screwless low profile faceplate, just 4mm deep with no visible fixings, fits a 35mm back box
Screwless Collection
Screwless Low Profile: minimalist design with clip-on faceplates and hidden fixings for a smooth, modern look.
Iridium Finish
The Iridium Black finish lends an air of sophistication and modernity with its deep, lustrous tone adding a touch of drama to stylish interiors. Supplied with black inserts and matching iridium rockers.
All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of Issue:
13th September 2026 © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.















